Ñèñòåìà ArboSky. ÀðáîØòàíãè. Êàðáîíîâûå òåëåñêîïè÷åñêèå øòàíãè ArboSky è îñíàñòêà.

About the project | Rods and equipment — description and prices | Contact

A key element of the ArboSky system - is a telescopic pole made of high-modulus carbon fiber.

Vertical test of the ArboSky 25 pole.
The pole length is 25 m + 2 m extension = 27 m.
It unfolds vertically, along the entire length of 27 m, without intermediate support points, in moderate wind.

Rope installation.

Tree pruning and trimming.

Spraying tree trunks and crowns.

Removing snow from trees.

Video inspection of large trees
and other elevated structures.

Poles and accessories — descriptions and prices:

1. ArboSky 25 telescopic pole.

The fully extended length is 25 m.
The length when folded is 2.3 m.
The weight is 6,46 kg.
High-modulus carbon - is one of the decisive factors that determine the ability and efficiency of performing high-altitude tasks.
Sections - 14.
Included:
1. Pole.
2. Bag case.
3. Lower rubber protective cap.

Price: 2700 ˆ.

The first video shows a vertical test of this pole (vertical extension to a full length of 27m (a 25m pole and a 2m extension), without intermediate support points, in windy conditions) — this is the best evidence of the rod’s quality and characteristics.

Furthermore, a very important design feature is - the presence of section extension limiters — this is a guarantee against accidental extension beyond the permissible limit or section popping out. The limiters are implemented perfectly — in the geometry of the tube of each section, the carbon rests against the carbon (not insulation, and not marking with paint (for those who are in the know)).

This design feature does not preclude the possibility of disassembling the pole (for use in parts or for cleaning).

2. ArboSky 15 telescopic pole.

The full length, when extended, is 15 m.
The fully extended length is 2 m.
The weight is 3,12 kg.
High-modulus carbon - is one of the key factors determining the possibility and effectiveness of performing high-altitude tasks.
There are 9 sections.
Included:
1. Pole.
2. Case-bag.
3. Lower rubber protective cap.

Price: 1750 ˆ.

All parameters are the same as those of the ArboSky 25 (carbon type, section geometry, clamps), the only difference is in the dimensions.


3. Rope installation device.

The minimum weight — all structural elements are made of carbon fiber.

The set includes:
1. The device.
2. A carbon reel with a 3mm / 30m line — 2 pcs.
3. A screwdriver attachment (for quickly winding the line onto the reel).
4. A carrying case.

Price: 290 ˆ.

The ability to very quickly, accurately, and safely hang a rope on any tree, even the tallest and most difficult one, eliminates or minimizes the need for traditional tree climbing techniques (climbing on loops, etc.) — this results in significant time and effort savings, especially when using an electric ascender to climb an arborist up a secured rope. In addition, this is essentially a non?contact tree climbing technique — the tree trunk is not damaged, which is inevitable with traditional techniques. Compared to long-existing methods of throwing/shooting a load with a thin cord - this technique has demonstrated significantly better results across all indicators: safety, speed, accuracy, the likelihood of misfires and time loss, and the requirements for the operator’s experience and qualifications. In a single operation (extending and folding the pole), you can attach two ropes at once (one for climbing, the other for safety) to two different points — this can be very useful on some trees, as it eliminates the need for the arborist to be secured to the trunk during climbing with numerous re?tackings on the branches. The time required to master this technique is one day; it’s very simple. Another useful feature (based on our experience) is the ability to quickly set up a rope as a guiding guy line when removing a tree, or when it is necessary to quickly and safely stretch and secure an emergency tree (climbing which is dangerous). In addition to arboriculture — this method of remotely installing anchor lines at a height of up to 27 m (when using the ArboSky 25 ArboSky Pole) will be very effective in many other fields where similar tasks involving high?altitude access and safety organization are required.

 

 

4. Saw attachment.

High-quality Fiskars bar saw, modified and adapted for use with our bars..
Included:
1. Saw.
2. Second blade.
3. Case.

Price: 230 ˆ.

 

5. Pruner attachment.

High-quality Fiskars pole pruner, modified and adapted for use with our poles..
Included:
1. Pruning shears.
2. Automatic cord reel.
3. Carrying bag.

Price: 190 ˆ.

This combination: a pruning saw + a pole pruner + ArboSky ArboStang - provides a significant technical leap in capabilities when addressing tree care tasks — sanitary, rejuvenation, formative pruning and trimming at heights of more than 5m — transforms what was once a technically challenging task, requiring either large ladders / aerial lifts / hoists, and/or arborists climbing trees, into an easy and interesting game that is accessible even to non-specialists. Given that the problem of overgrowth and dense planting in areas established 10, 20, or 30 years ago is typical for most such plots and territories (largely due to the lack of simple and accessible technical options for high?altitude access), the advantages of this toolkit in addressing this problem are hard to overestimate.

For most situations - the optimal combination will be with the ArboSky 15 arborist pole — it is lighter (than the ArboSky 25), has a shorter length when folded (the clamps are located lower, which makes working more convenient), and ensures comfortable and fast work within a height range from 0 to 15 m. Using the ArboSky 25 arborist pole will allow you to set height records for pruning/trimming trees from the ground.

 

 

6. Adapter for the saw and pruner.

To install the saw/pruner on the rod.

Price: 50 ˆ.

Quick-release connection — changing the tool takes just a second, which is very important when you need to frequently switch between a saw and a pruner.

 

7. Spraying kit for ArboSky pole.

The set includes:
1. An adapter for mounting on a boom.
2. A 50?meter hose.
3. A set of quick?release connectors.
4. A set of sprayers/nozzles.

Price: 190 ˆ.

Incredible, but true - now it is possible to fully treat the trunks and crowns of even 30–40-meter-tall trees from the ground, without having arborists climb them, without using aerial lifts or aviation. You will need: ArboSky ArboShinga, this spraying kit, and a unit for preparing and delivering working solutions (a sprayer).

 

8. Unit for preparing and delivering treatment solutions.

ArboSky AS100.
Our design and assembly.
Tank capacity: 100 l.
Membrane pump with a 220 V electric motor, pressure regulator, flow rate: 25 l/min, pressure: 25 bar.
For carrying out all kinds of tree treatments — including using the ArboSky ArboRod, for aerating the root zone of the soil and root stimulation.
Included:
1. Unit.
2. 1/2 reinforced supply hose, 50 m.

The installation is designed to be quickly disassembled (pump + tank + cart), which allows it to be transported in the trunk of a passenger car.

The platform trolley can be used separately for transporting goods.

Price: 1580 ˆ.

This is a professional sprayer, suitable for all major tree care activities, designed / used / manufactured by us using proven components.

There is an option with two pumps — to increase the speed and effectiveness of aeration and root stimulation measures.

 

9. Compact spraying unit for use with an ArboSky pole.

ArboSky AS30.
This is the most compact, mobile, and budget-friendly solution for tree treatment using ArboSky pole.
Included:
1. A portable 30-litre container.
2. A rechargeable pumping station, 30 bar (pressure adjustable), 7 l/min.

Price: 370 ˆ.

An ideal solution for small-scale processing and/or challenging working conditions (it is difficult to move a large sprayer, difficulties with connecting to water and electricity, etc.).

 

10. Root injector and aerator.

Braglia Root Feeder is an Italian root injector, high-quality, efficient, reliable, and durable.

Price: 450 ˆ.

Aeration of the root zone of the soil and root stimulation - are the most effective ways to normalize the condition of weakened trees and trees growing in unfavorable conditions.

 

11. Spray gun.

The Braglia spray gun is very convenient and reliable.

Price: 120 ˆ.

 

12. Plastic step stool.

For easier work with the ArboSky 25m pole.

Price: 30 ˆ.

The upper clamps of the rod sections are located at a height above 2 m — this stool greatly facilitates working with the upper sections of the rod. We use it ourselves and recommend it.

 

13. IML Resi MD-100 resistance drill.

This simple mechanical resistograph is an ideal tool for everyday tree diagnostics work; it doesn’t provide beautiful images for reports, but it quickly and simply provides very accurate information about the tree’s condition, and its cost is many times lower than that of electronic resistographs. Made in Germany.

Safety is the number one priority when working with large trees.

The set includes:
1. Resistance drill.
2. Carrying case.
3. 2 drill bits.
4. Key for installing and replacing the drill bit.

Price: 900 ˆ.

 

 

14. Husqvarna t540i xp battery-powered chainsaw.

The winner of the competition for the title of the best cordless saw for arborists and not only (based on the results of our many years of testing saws from various manufacturers).
Included:
1. Chainsaw.
2. 14-inch guide bar and chain.
3. Wrench.

Price: 590 ˆ.

There are batteries and other accessories.


 

15. Pole-mounted chainsaw/pruner.

In development.

Soon.

 

16. Pole-mounted hedge trimmer.

In development.

Soon.

 

17. Pole-mounted video inspection system for trees and other elevated structures.

In development.

Soon.

 

18. Video inspection system for trees and other elevated structures using a drone video system.

All you need is a drone and an adapter to mount it on the pole.

You can work in areas where drone flights are prohibited or difficult, you don’t need a qualified drone operator, and the risks are minimal—almost zero.

The capabilities of the drone’s excellent camera (in some models — with good optical zoom and a thermal imager), excellent, lag-free communication, and the ability to display the image on glasses (which is much more informative than a tablet/phone screen or something similar) will yield excellent results.

 

19. Adapting ArboSky poles for advanced water-fed pole (WFP) building-cleaning systems.

In development.

Soon.

 

About the project.

This project was created and is being developed by us, the team of the company “Forest Doctor”.

For over 20 years, we have specialized in tree care tasks.

Here, we have brought together all our experience and knowledge, concentrating them in the solutions we offer, which enable us to:

1. Reduce the complexity and labor intensity of many tasks by a significant margin, and consequently make them more accessible and in demand.

2. Significantly reduce the risks when performing them (the performer remains on the ground).

3. Implement new effective methods and approaches in tasks related to the maintenance of green spaces and many others that were previously unavailable due to the lack of rational technical capabilities.

The poles themselves are manufactured according to our special order at one of China’s leading factories.

The main idea of the project is to unlock the amazing potential of carbon rods in a wide variety of potential applications — arboriculture, maintenance of tall plants in general, washing buildings, structures, solar panels, inspection of high?rise objects, and many other tasks that require high?altitude access.

The telescopic carbon poles ArboSky - premium-level, made of high-modulus carbon — have remarkable characteristics and capabilities, allowing you to solve what seemed like incredible, high-altitude tasks just yesterday, while staying on the ground.

To see where and how the Rod can be used, ensuring a qualitative leap in efficiency / safety / environmental friendliness; to develop appropriate technical solutions, including all the necessary additional equipment elements or adaptations to the existing tool; to test them and offer you ready?made solutions and their support — consultations, training, service and spare parts - that is the essence of our ArboSky.

 

Contact.

+37129230032

E-mail: igor@arboskay.com

The information on this page is currently in its minimum necessary, draft form; all questions should be directed by phone or via WhatsApp, Telegram, e-mail: igor@arboskay.com